Description
Digital pressure control ensures rapid and gentle vacuum drying, its speed-controlled vacuum pump (accessory) saves around 70% energy. The direct contact between the load and the heatable and removable thermoshelves in the chamber of the Memmert vacuum oven VO29 ensures rapid and uniform temperature.
Features:
- ControlCOCKPIT: TwinDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays.
- Timer: Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
- Adjustable Parameters: Temperature (Celsius or Fahrenheit), pressure (vacuum), timer
- Language Setting: German, English, Spanish, French, Polish, Czech, Hungarian
- ControlCOCKPIT: Adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays.
- Timer: Counter with target time setting, adjustable from 1 minute to 99 days
- Function SetpointWAIT: the process time does not start until the set temperature is reached
- Temperature control: Mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 10°C above nominal temperature
AutoSAFETY: Additionally integrated over- and undertemperature protection “ASF”, automatically following the setpoint value at a preset tolerance range, alarm in case of over- or undertemperature, heating is switched off in case of overtemperature, compressor in case of undertemperature - Auto diagnostic system: Integral fault diagnostics for temperature and humidity control
- Alarm: visual and acoustic
Specifications:
- Volume: 29 L
- Dimensions: w x h x d : 15.2” x 12” x 9.8”
- Max. number of internals: 2
- Max. loading of chamber: 40 kg
- Max. loading per internal: 20 kg
- Material: hermetically welded stainless of extremely corrosion-resistant stainless steel, material 1.4404
- Electrical: 230 Volts, ± 10%, 50/60 Hz, approx. 1.7 A @ 230 V
- Temperature measured through 4-wire Pt100 sensor individually for each thermoshelf
- Working Temperature Range: min. 5°C above ambient up +200°C
- Setting temperature range: 0.1°C
- Vacuum range: 5 to 1100 mbar
- Pressure control: Digital electronic pressure control for a speed-controlled vacuum pump. Tubing for vacuum and air are made of material 1.4571 (ASTM 316 Ti). Programmable, digitally controlled inlet for air and inert gas.
- Permitted final vacuum: 0.01 mbar
- Maximum leakage rate: 0.01 bar/h
- Pump control: speed control, optimized rinsing procedures for the pump membranes as well as signal for pump ON/OFF
- Connection: Vacuum connection with small flange DN16, and gas inlet with small flange DN16
